Description
The Digital version of our C440-HVA
The new C440-HVA “D”
Diversion and Solar Disconnect Charge Regulator
**
- Fully Digital user interface.
- Solenoid based with 3 stage charge control.
- No jumpers or potentiometers need to be set.
- LCD 2 x 16 Back-lit display
- Both manual and automatic equalize modes are available.
- Dual shunts for monitoring both solar and turbine amperage and wattage.
- Automatic Nominal Battery Voltage Detection.
- Nearly all charge parameters can be set.
- Relay on time can be controlled and set for diversion times up to several hours.
- Upper and lower set points can both be set.
- Automatic LCD back light dimming to save energy.
- Dual internal Truck Star breakers, one each for your turbine input and diversion output.
**
- Perfect for wind and/or hydro based systems and small solar systems. This controller has been designed for wind systems but also works for solar systems up to 125 amps**
Note: 440 amps is not continuous, but is limited to 20% duty time in the diversion mode only.
The enclosure is heavy gauge, solid steel, ready to mount. — Simple and rugged.
This Hoffman pull box is perfect for terminating larger wire. It has multiple knockouts on each side of the box. The box measures 8.25″ x 12″. The electronics are fully isolated from the box.
When you compare this controller to the others, you will see why we built it and why we know you’ll love it.
** The solenoid in this unit has been tested to over 440 amps. We have installed two 150-amp breakers as a standard configuration.
This allows for 9000 watts of wind power in a 48-volt system, 4500 watts in a 24-volt system and 2250 watts in a 12-volt system.
Solar systems should be designed for no more than 125 amps continuous current.. **
Reviews
There are no reviews yet.